Guide to construction

If you want to do a job, like Station Engineer, you need to know how to build and deconstruct stuff.

Basic Tools

Before you can begin any construction or deconstruction you need to gather a few useful tools.

These tools can be found in any blue Mechanical Toolbox on the station. They can also be made in an Autolathe or dispensed from a YouTool -vending machine.

Crowbar

Screwdriver

Welder

Wirecutters

Wrench

Materials

To build anything, you need materials.
Keep in mind that almost any material can be used to make doors, floor tiles and statues.

Metal

Metal Found in: Ready stacks in Engineering, Auxiliary Tool Storage, E.V.A., Robotics and Atmospherics. Shaft Miners have the ability to smelt more from iron ore and Cargo can order more. Used for: Constructing various things from supportive elements to decorations Strategy: Hold in active hand and activate to start building Description Things you can make by having Metal in your hand and activating it: Stool (1 sheet) Bar Stool (1 sheet) Chair (1 sheet) Swivel Chair (i.e. office chairs) (5 sheets) Comfy Chair (2 sheets) Bed (2 sheets) Rack parts (1 sheets) Closet (2 sheets) Canisters (10 sheets) 4x Floor tiles (1 sheet) 2x Metal rods (1 sheet) Wall girders (2 sheets) Computer frame (5 sheets) Modular console (10 sheets) Machine frame (5 sheets) Airlock assembly (4 sheets) Firelock frame (3 sheets) Turret frame (5 sheets) Meatspike frame (5 sheets) Reflector frame (5 sheets) Grenade Casing (1 sheet) Light fixture frame (2 sheets) Small light fixture frame (1 sheet) APC frame (2 sheets) Air alarm frame (2 sheets) Fire alarm frame (2 sheets) Extinguisher cabinet frame (2 sheets) Button frame (1 sheet) Iron Door (20 sheets) Floodlight frame (5 sheets) Other things you can do with Metal: Turn a scooter frame into a skateboard, a scooter without a handle. (5 sheets) Metal tables when added to table frame. (1 sheet) Finish wall girders into walls. (2 sheets) Repair broken walls. (1 sheet) Add armor to turret frames. (5 sheets) Refill an Exosuit Fabricator, Autolathe or Protolathe/Techfab. (2000 material per sheet) See Constructions. How to produce Metal: Smelt iron ore at the Mining furnace.

Glass and Reinforced Glass

Glass and Reinforced Glass Found in: Stacks exist in Engineering, Auxiliary Tool Storage, E.V.A., Atmospherics and Robotics. Shaft Miners have the ability to smelt more from sand and Cargo can order more. Used for: Constructing windows and other things Strategy: Hold in active hand and activate to start building Description Glass: Things you can make by having Glass in your hand and activating it: One Directional Glass panel Full Glass panel (2 sheets) Glass Tables when added to table frames (1 sheet) Other things you can do with Glass: Glass Lenses to grenade casings. Refill a Circuit Imprinter, Autolathe or Protolathe/Techfab. (2000 material per sheet) Reinforced Glass: Things you can make by having Reinforced Glass in your hand and activating it: One Directional Reinforced Glass panel Full Reinforced Glass panel (2 sheets) Windoor frame (5 sheets) Other things you can do with Reinforced Glass: Part of AI Core assembling Add windows into Airlocks Refill a Circuit Imprinter, Autolathe or Protolathe/Techfab. (2000 glass and 1000 metal materials per sheet) How to produce Glass: Smelt sand at the Mining furnace, or smelt Glass shards with a Welding Tool to reform them into Glass sheets. How to produce Reinforced Glass: Use rods on glass

Nanocarbon glass

Nanocarbon glass Found in: Ready stacks in Engineering Shaft Miners have the ability to smelt more from iron and silver. Used for: Constructing windows Strategy: Hold in active hand and activate to start building Description Things you can make by having nanocarbon glass in your hand and activating it: nanocarbon reinforced fulltile window (2 sheets) How to produce Nanocarbon glass: Smelt nanocarbon glass at the Mining OreRedemptionMachine or produce it at a department lathe (2000 iron and 2000 glass per sheet)

Plasteel

Plasteel/Reinforced Metal Found in: A stack exists in Engineering, E.V.A. and Robotics. Shaft Miners have the ability to smelt more with iron and plasma ores. Cargo can order more, but they are very expensive. Used for: Reinforcing walls, mechs, building an AI Core Strategy: Hold in active hand and activate to start building Description Plasteel is an alloy of plasma and iron. Things you can make by having Plasteel in your hand and activating it: AI core (4 sheets) Bomb Assembly (10 sheets) Pestle (1 sheet). Use with mortar for ghetto grinding. Other things you can do with Plasteel: Reinforcing, repairing and finalizing walls (2 sheets) Reinforced Tables when added to table frames (1 sheet) See Constructions. How to produce Plasteel: Smelt a combination of iron ore and plasma ore in the Ore Redemption Machine or Mining furnace.

Durasteel

Durasteel Found in: Ready stacks in Engineering Shaft Miners have the ability to smelt more from iron and silver. Used for: Constructing various hull platings and tiles Strategy: Hold in active hand and activate to start building Description Things you can make by having durasteel in your hand and activating it: 4x nanoweave platings (1 sheet) 4x durasteel hull platings (1 sheet) 4x riveted hull platings (1 sheet) 4x padded steel platings (1 sheet) 4x embossed hull platings (1 sheet) 4x embossed hull platings - alternative look (1 sheet) 4x steel monotiles (1 sheet) 4x dark monotiles (1 sheet) 4x light monotiles (1 sheet) How to produce Durasteel: Smelt durasteel at the Mining furnace or produce it at a department lathe (2000 iron and 2000 silver per sheet)

Duranium

Duranium Found in: Ready stacks in Engineering. Shaft Miners have the ability to smelt more Used for: Constructing railgun rails and mac barrels, reinforcement of walls Strategy: Hold in active hand and activate to start building Description Things you can make by having Duranium in your hand and activating it: Railgun rail (1 duranium sheet) Mac Barrel (1 duranium sheet) Other things you can do with Duranium: Finish wall girders into reinfocred walls. (2 sheets) How to produce Duranium: Smelt Duranium at the Mining furnace.(2000 iron, 1000 plasma and 1000 silver for one sheet) (something to note : RCDs produce reinforced walls with duranium)

Rods

Rods Found in: Stacks exist in Engineering, Auxiliary Tool Storage, E.V.A.. More can be made from Metal sheets. Used for: Constructing grilles and reinforcing Strategy: Hold in active hand and use it on things Description Things you can make by having rods in your hand and activating them: Grille (by clicking in your hand) Make a scooter frame Other things you can do with rods: Lattice (for floors, by clicking on a space tile) Reinforcing plating (by clicking on the plating) Reinforcing normal glass into reinforced glass (have rods in hand while clicking glass sheet) Put a handle on a skateboard and turn it into a scooter Can be turned back into metal sheets by being welded with a Welding Tool See Constructions How to produce Rods: Use Metal and click "2x metal rods" (makes two sets of rods).

Floor Tiles

Floor Tiles Found in: Ready stacks can be found nowhere, can be made from metal or removed from the floor with a crowbar Used for: Constructing Plating or Steel Floor Description Tiles used to construct floors. Things you can do with Floor Tiles: Use on lattice to build plating. Use on plating to build steel floor. Use on another type of already placed floor tile while holding a crowbar in other hand to replace existing floor. Use on Metal Foam floor to convert it to plating. See Constructions. How to produce Floor Tiles: Use metal or almost any other material and click "4x floor tiles" (makes 4 floor tiles).

Planks

Planks Found in: Ready stacks can be found nowhere, can be made from deconstructing tables. Used for: Constructing various wooden things Strategy: Hold in active hand and activate it to start constructing Description Things you can make by having Planks in your hand and activating them: Wooden Sandals (1 plank) Wood floor tile 4x (1 plank) Wooden table frame (2 planks) Rifle stock (10 planks) Rolling pin (2 planks) Wooden chair (3 planks) Winged wooden chair (3 planks) Wooden barricade (5 planks) Wooden door (10 planks) Coffin (5 planks) Bookcase (4 planks) Drying Rack (10 planks) Dog bed (10 planks) Dresser (10 planks) Picture frame (1 plank) Display case chassis (5 planks) Wooden buckler (20 planks) Apiary (40 planks) Tiki mask (2 planks) Honey frame (5 planks) Wooden bucket (3 planks) Rake (5 planks) Ore box (4 planks) Wooden crate (6 planks) Baseball Bat (5 planks) Loom (10 planks) Mortar (3 planks). Use with pestle for ghetto grinding. Can hold 100u. Firebrand (2 planks) Pew (3 planks) How to produce Planks: Grow Tower Caps and cut them up with a Hatchet.

Leather

Leather Found in: Ready stacks can be found nowhere, but can be produced. Used for: Making leather products such as toolbelts and bandoliers Strategy: Hold in active hand and use it to craft things Description Things you can make by having Leather in your hand and activating it: Wallet (1 piece) Muzzle (2 pieces) Botany gloves (3 pieces) Toolbelt (4 pieces) Leather satchel (5 pieces) Bandolier (5 pieces) Leather jacket (7 pieces) Leather overcoat (10 pieces) How to produce Leather: Either use the Biogenerator inside Hydroponics or Garden, or create leather through tanning: Slaughter/gib certain animals/creatures for their hides. Use a sharp weapon on a hide to turn it into hairless hide. Wash the hairless hide by using water on it, to turn it into wet leather. Dry the wet leather by using it on a drying rack, or by heating it above 500 Kelvin for some time.

Cloth

Cloth Found in: Ready stacks can be found nowhere, but can be produced. Used for: Crafting certain textiles and repairing damaged clothes Strategy: Hold in active hand and use it to craft things. Description Use on clothes damaged by fire or acid to repair them. Things you can make by having Cloth in your hand and activating it: Grey jumpsuit (3 rolls) Black shoes (2 rolls) Backpack (4 rolls) Duffel bag (6 rolls) Plant bag (4 rolls) Book bag (4 rolls) Mining satchel (4 rolls) Chemistry bag (4 rolls) Bio bag (4 rolls) 2x improvised gauzes (1 roll) Rag (1 roll) Bedsheet (3 rolls) Empty sandbag (4 rolls) Fingerless gloves (1 roll) Black gloves (3 rolls) Blindfold (2 rolls) How to produce Cloth: Use the Biogenerator inside Hydroponics or Garden, or use Wirecutters on bedsheets.

Plastic

Plastic Found in: Ready stacks can be found nowhere, but can be produced. Used for: Making a few plastic products, or used in a department Protolathe/Techfab Strategy: Hold in active hand and use it to craft things Description Things you can make by having Plastic Sheets in your hand and activating it: Plastic flaps (5 sheets) Water bottle (1 sheet) (Holds 50 units of liquid) Large water bottle (3 sheets) (Holds 100 units of liquid) Wet floor sign (2 sheets) Other things you can do with Plastic: Insert into a Protolathe/Techfab. Some products need plastic, such as 120u XL beakers and Surgical Drapes. How to produce Plastic: Made in the Chemistry lab

Cardboard

Cardboard Found in: Can sometimes be found in Maintenance. Used for: Making a few items Strategy: Hold in active hand and use it to craft things Description Things you can make by having Cardboard in your hand and activating it: Box (1 cardboard sheet) Light tubes (1 cardboard sheet) Light bulbs (1 cardboard sheet) Mouse traps (1 cardboard sheet) Cardborg suit (3 cardboard sheets) Cardborg helmet (1 cardboard sheet) Pizza box (1 cardboard sheet) Folder (1 cardboard sheet) Large box (4 cardboard sheets) Cardboard cutout (5 cardboard sheets) Fancy boxes (many types) (1 cardboard sheet) How to produce Cardboard: Empty a box and activate it in your hand to turn it into cardboard. Most crewmembers start with a box in their backpack. Can be produced with a biogenerator.

Constructions

Lattice

The basic base for all types of construction, this is placed directly in space.

Lattice	Requires to build	How to build
	x1	Use the rod on an empty space tile.
How to deconstruct
Tools	Use wirecutters to cut the lattice into one rod.

Catwalk

Just like a lattice, except you can place wires on it.

Catwalk	Requires to build	How to build
	x1 on lattice (x2 on plating)	Use the rods on a lattice or plating.
How to deconstruct
Tools	Use wirecutters to cut the catwalk into 2 rods.

Plated Catwalk

A decorative cover for the floor

• Use a crowbar to access the floor below it.
• Useful as a handhold in zero-gravity.

Plated Catwalk	Requires to build	How to build
	x2 x1	Use the rods on a monotile.
How to deconstruct
Tools	Use wirecutters to slice the plated catwalk back into the original plating used to make it.

Plating

The basic floor which you put things like wires and pipes upon. 'All' floors and walls are built on top of this.

Plating	Requires to build	How to build
	x1	Use a floor tile on a lattice.
How to deconstruct
Tools	Use a crowbar on broken plating, otherwise it does not deconstruct. Can be deconstructed with an RCD.
How to repair
Tools	Use a welder on broken plating to repair it.

Steel Floor

This is the basic "nice" floor, this floor should be considered used in all public areas, hence why there's none of these in maintenance tunnels.

Steel Floor	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Nanoweave Carpet

Nanoweave carpet tiles is made from durasteel. They combine with other adjacent nanoweave carpets and form different patterns similar to other capret

Nanoweave Carpet	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Durasteel hull plating

Durasteel hull plating is made from durasteel. This plating is normally found in the hallways of different ships.

Durasteel hull plating	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Riveted steel hull plating

Riveted steel hull plating is made from durasteel. It gives a bit of an "industrial" look.

Riveted hull plating	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Padded steel hull plating

Padded steel plating plating is made from durasteel.

Padded steel hull plating	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Embossed hull plating

Embossed hull plating is made from durasteel. This plating is normally found in the hallways of different ships together with Durasteel hull plating.

Embossed hull plating	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Alternative Embossed hull plating

Alternative Embossed hull plating is made from durasteel. Basically same thing as above but looks a bit different

Alternative Embossed hull plating	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Steel monotile

Steel monotiles are made from durasteel. This kind of Flooring is not divided in the four usual parts but is instead one tile

Steel monotile	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Dark monotile

Dark monotiles are made from durasteel. The darker counterpart to the one above

Dark monotiles	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Light Monotile

Light Monotiles are made from durasteel. This one has a lighter more friendly tone and one bolt in the four corners

Light monotiles	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Wood Floor

This is a fancy floor, used in the library and similar places.

Wood Floor	Requires to build	How to build
	x1	Use a wood tile on plating. Wood tiles can be made of planks of wood.
How to deconstruct
Tools	Detach the tile with a screwdriver. Alternately: Destroy it with a crowbar. This will not give you a wood tile back.
or

Reinforced Floor

This is a reinforced floor, used in science and similar areas for better protection against fire or explosions.

Reinforced Floor	Requires to build	How to build
	x2	Use rods on a plating.
How to deconstruct
Tools	Use a wrench to dismantle it to two rods.

Carpeted Floor

This is a carpeted floor, used to make your office look fancy.

Carpeted Floor	Requires to build	How to build
	x1	Use a carpet floor on a plating.
How to deconstruct
Tools	Use a crowbar to pick up the carpet tile.

Light Floor

A fancy, more futuristic floor that lights up its surroundings.

Light Floor	Requires to build	How to build
	x1 x1 x5	Use the cable wire on glass. Use the metal on the tile you get. (Deconstruct the floor to plating, if needed.) Place the light tile on a plating.
How to deconstruct
Tools	Use a crowbar on the light tile to remove the metal. Use wirecutters on the resulting tile to separate wires from glass.

Walls

Normal Wall

This is the standard type of wall found around the station, they are easy to construct and remove but are not as strong as reinforced walls. They also come in a hidden door variety. Walls can also be made out of different minerals, uranium being special with emitting strong radiation around it. They're useful for:

• Keeping people out.
• Keeping people in.
• Keeping people from going places.

Wall	Requires to build	How to build
	x4	Stand where you want the wall. Click the metal in your hand to open the construction panel. Choose 'Build wall girders' from the list. Use the remaining 2 sheets of metal on the girder.
How to deconstruct
Tools	Weld off the plating. Use a Wrench to unsecure the girder. Screwdriver to disassemble the girder.

Reinforced Wall

This is the reinforced type of wall found in secure areas of station, they are reasonably simple to construct, but are very time consuming to remove. They also can be made as a hidden door. They're useful for:

• Keeping people in and out of high security areas.

Reinforced Wall	Requires to build	How to build
	x2 x2	Stand where you want the reinforced wall. Click the metal in your hand to open the construction panel. Choose 'Build wall girders' form the list. Use the plasteel on the girders to reinforce them. Use the last plasteel sheet on the reinforced girders to finish the wall.
How to deconstruct
Tools	Wirecutters to cut the outer grille. Screwdriver to remove the support lines. Weld through the metal cover. Crowbar to pry off the cover. Wrench to loosen the support rods. Weld through the support rods. Crowbar to pry off the outer sheath. Screwdriver to unsecure the support struts. Wirecutters to remove the support struts. Wrench to unsecure the girder. Screwdriver to disassemble it.

Normal/Reinforced Hidden Door

Also known as "Fake Walls" or "Hidden Walls". With a little imagination, hidden doors can be used in many marvelous tactics, varying from ambushes to passages into your very own secret hideaway room.

• Click to open.
• An almost undetectable escape route.
• Otherwise, same as a regular wall.

Hidden Door Reinforced Hidden Door	Requires to build	How to build
	x4 or x2 x2	Stand where you want the door. Click the metal in your hand to open the construction panel. Choose 'Build wall girder' from the list. Use wrench on the girder and wait a few seconds for it to dislodge. Use the remaining 2 sheets of metal, or plasteel for a reinforced type, on the girder. To turn a normal wall into a hidden door, deconstruct it until the final screwdriving of the girder, and instead use 2 sheet of metal on the girder.
How to deconstruct
Tools	Screwdriver to tighten the bolts and turn it into a regular wall. Or... Weld to dismantle the false wall. Screwdriver again to disassemble the girder.

Normal/Reinforced Windows

Windows are aesthetically quite pleasing because they are almost invisible. You can build two types of windows:

• Full: A see-through wall. Usually only used if you don't have enough for 2-4 one-directionals or the metal for a wall.

• One Direction: Stops movement only from the way it faces.

Windows Reinforced Windows	Requires to build	How to build
	x1/x2 (single/full) or x1/x2 (single/full)	Click the glass/reinforced glass in hand. Select Full or One Direction from the menu. Drag where you want it. Alt-click to rotate to the direction you want if one-directional. Screwdriver it in place. Continue if reinforced glass: Crowbar (Pop pane in). Screwdriver (Secure pane).
How to deconstruct
Tools	Normal window (including plasmaglass): Screwdriver to unscrew the window from the floor. Wrench to deconstruct the window. Hitting a normal pane repeatedly with a weapon will smash it into glass shards. Normal windows have 50 integrity (health), while plasma windows have 300. Directional windows have half integrity. Reinforced window (including reinforced plasmaglass): Welder to heat one way screws (18 seconds, harm intent required) Screwdriver to unscrew one way screws (8 seconds, must be done within 30 seconds of step 1) Crowbar to pop out panel (5 seconds) Wirecutters to cut connecting bars (3 seconds) Wrench to unbolt frame (5 seconds) Reinforced windows require a melee item over 11 damage to damage at all, have 150 integrity, and 90 melee armor. This is approximately 2 minutes of sustained beating with a toolbox. Reinforced plasma windows require a melee item over 21 damage to damage at all, have 1000 integrity, and 90 melee armor. Breaks down into glass shards and a metal rods. Directional windows have half integrity.

Wall Mountings

APC

Info about Area Power Controllers can be found here.

If broken, you will have to deconstruct then construct the APC. An entire set of fresh parts will be needed.

APC	Requires to build	How to build
	x2 x1 Power Control Module x1 x1 x1	Use the metal and make an APC frame. Use the frame on the wall you want the APC on. May only be placed in areas which have been defined as a Station Area using the Chief Engineer's Station Blueprints) or by creating a new area with the "create new area" hud-button (looks like a lizard face). The area used is the area in which the person placing the frame is standing. Add a Power Control Module. Remove any floor tile in front of it. Add cable coil. This creates a terminal on the floor. Wire the power network into a powered wire under the terminal, for external power. Screwdriver the APC electronics into place. Add the power cell. Crowbar shut. It starts unlocked with the cover engaged and the main breaker turned off.
How to deconstruct
Tools	Swipe Card to unlock APC, and then disengage cover lock. Alternatively, if the APC is broken (tilted and cracked cover), try using a fire extinguisher to smash off the cover, allowing access to the battery. Crowbar to open the cover. Remove power cell by hand. Screwdriver to unsecure electronics. Crowbar to lift floor tile in front of APC. Wirecutters on APC to remove cable and terminal from floor. Crowbar to remove Power Control Board. (You can click on the broken frame with a new APC frame here to skip to step three of construction) Welder to remove from wall. Wrench the frame, that is now detached from the wall, deconstructs it to two metal sheets.

Air Alarm

Info about Air Alarms can be found here.

Air Alarm	Requires to build	How to build
	x2 x1 Air Alarm Electronics x1	Use the metal and make an Air Alarm frame. Use the frame on the wall you want it on. Put in the Air Alarm Electronics. Wire it with 5 cable pieces. Screwdriver to close.
How to deconstruct
Tools	Open cover with screwdriver. Cut all wires except the syphon wire using wirecutters. Use wirecutters on the air alarm to cut the remaining wires. Pry out the circuit using the crowbar. Remove the frame from the wall using the wrench.

Fire Alarm

Info about Fire Alarms can be found here.

Fire Alarm	Requires to build	How to build
	x2 x1 Fire Alarm Electronics x1	Use the metal and make an Fire Alarm frame. Use the frame on the wall you want it on. Put in the Fire Alarm Electronics. Wire it with 5 cable pieces. Screwdriver to close.
How to deconstruct
Tools	Open cover with screwdriver. Cut all the wires using wirecutters. Pry out the circuit using the crowbar. Remove the frame from the wall using the wrench.

Security Camera

Electric eyes of the AI or for camera monitors to look through.

Camera upgrades:

• Solid Plasma for EMP-proofing.
• Analyzer for X-ray.
• Proximity Sensor for motion alarm.

See here how to hack a Security Camera.

Security Camera	Requires to build	How to build
	x1(400units per camera) x1(250units per camera) x1	Use the autolathe to print a Camera Assembly. Attach the Camera Assembly to a wall. Weld it to the wall. Add wire. OPTIONAL: Add any additional upgrades (plasma, analyzer or prox sensor). Screwdriver the camera to complete it. Set camera network (default is SS13).
How to deconstruct
Tools	Screwdriver the camera to open the back panel. Use your wirecutter to cut all the wires. Use your welder to unweld the camera from the wall. Wrench the camera to unattach it from the wall. Crowbar the camera assembly to remove any upgrades.

Light Fixture

Provides light for the people. Bulb fixture is much dimmer than the tube-one.

Light Fixture	Requires to build	How to build
	x1/x2 x1 x1 or x1	Build frame from 2 metal sheets (or 1 metal sheet for small fixtures). Place frame on wall. Add wires. Screwdriver. Add light tube (or light bulb for small fixtures).
How to deconstruct
Tools	Turn off the light if needed and remove the light tube or bulb from the fixture. Screwdriver the light fixture to expose the wires. Wirecutters to cut the wires. Wrench the fixture frame to deconstruct it.

Other

Grille

Grilles are usually used in combination with directional windows. They allow gases and energy rounds to pass through them, but stop other objects. They can also be electrified for high security areas by building them on top of a live power wire.

• Keeping people in or out.
• Securing an area with electrified grilles.

Grille	Requires to build	How to build
	x2	Stand where you would like the grille to be placed. Click on the stack of 2 rods with the hand you have them in.
How to deconstruct
Tools	Use wirecutters to neatly cut the grille, or ...Use a screwdriver to unfasten and drag it away, or ...Smash it down.
or

Barricade

The poor man's barrier, not nearly as strong or cool looking. Useful for:

• Keeping people in or out, for a short while.

Wooden Barricade	Requires to build	How to build
	x5	Stand where you would like the barricade to be placed. Click on the stack of planks in your hands and choose "Wooden Barricade".
How to deconstruct
Tools	Cannot be neatly deconstructed. Just smash it with anything to get 3 planks.
Anything
How to repair
Tools	Use wooden planks to repair.

Windoor (Window-door)

Like a door, but with access controls. Windoors can't be hacked or even pried open with jaws of life. Emagging works.

Windoor	Requires to build	How to build
	x5 x2 x1 Airlock Electronics x1	Click the reinforced glass pane. Click the "Windoor" button. Wrench. Plasteel (Optional: To create a secure windoor). Cable. Airlock Electronics. Crowbar.
How to deconstruct
Tools	Open the windoor. Screwdriver to open the maintenance panel. Crowbar out the airlock electronics. Remove wires from the assembly with wirecutters. Unanchor it by wrenching. Weld it to deconstruct the assembly into reinforced glass and rods.

Button

This is a button - it can remotely control an airlock. You can also put a signaler in one to have it pulse the signaler when pressed.

Button	Requires to build	How to build
	x1 OPTIONALAirlock Electronics x1	Use the metal and make a Button Frame. Use the Button Frame on a wall. Click the Button Frame on the wall to change its button type. Add a signaler (other assemblies may work, untested) or airlock controller (normally unobtainable, but this is what makes them work when map-spawned). Add the Airlock Electronics Board to the button frame if you want the button to require a certain access to activate or deconstruct. (You need to program this) Screwdriver the Button Frame to close it.
How to deconstruct
Tools	(Screwdriver the button open.) Remove the airlock electronics. Wrench the open button frame. Weld it to deconstruct to metal plates.

Firelock

This is a firelock - it locks an area when a fire alarm in the area is triggered. Don't get squished!

Firelock	Requires to build	How to build
	x3 OPTIONAL:x2 x1 Firelock Electronics x1	Use the metal and make a Firelock Assembly. Add the Firelock Electronics Board to the firelock frame. Add Wires. Crowbar. (OPTIONAL) Add Reinforced Metal to make a heavy firelock. Wrench to bolt it and finish.
How to deconstruct
Tools	(Crowbar the firelock shut.) Weld the firelock shut. Screw the access panel open. Wrench the firelock to unbolt it. Crowbar to pry the wire cover off. Wirecut the wires out. Crowbar the electronics out. Weld it to deconstruct to metal plates.

Reflector

This is an angular beam reflector. Any energy projectiles hitting it will be reflected at an angle depending on rotation. There are also "box" reflectors that change the direction of struck projectiles to face a single way, regardless of where they impact the reflector. The supermatter engine uses reflectors to make its emitters' beams go through a single path. Ballistic projectiles will not be reflected!

• You can weld it to anchor it to or unanchor it from the floor, or to repair it.
• Use a screwdriver to lock or unlock its rotation.
• Alt-click it to rotate its angle.

Reflector	Requires to build	How to build
	x5 x5 OR x10 OR x1	Use the metal and make a reflector frame. Option 1: Add 5 glass sheets to make a single-sided reflector. Option 2: Add 10 reinforced glass sheets to make a double-sided reflector. Option 3: Add 1 diamond sheet to make a box reflector. Weld the reflector to the floor.
How to deconstruct
Tools	Weld the reflector to cut it free from the floor. Wrench the reflector to disassemble it.

Airlock

This is an airlock - it locks air. Everyone just calls them doors, although they are not actual doors. If you want to hack an airlock, see here.

Airlock	Requires to build	How to build
	x4 OPTIONAL: x1 x1 Airlock Electronics x1	Use the metal and make an Airlock Assembly. Wrench it in place. (Optional) Use Pen to name the airlock. (Optional) Add Reinforced Glass to make a glass airlock. Add Wires. Use the Airlock Electronics Board and set the access level. Add the Airlock Electronics Board to the airlock frame. (Optional) Use 2 sheets of Metal or Plasteel for added security Screwdriver to finish.
How to deconstruct
Tools	If the airlock has been emagged, skip to step 4. Weld the door shut. (Must be in harm intent). Screwdriver the door. Use multitool and/or wirecutters to disable the power whilst keeping the doorbolts up as detailed here. Crowbar the electronics out. (Make sure you have exposed the panel with a screwdriver first.) Wirecut the wires out. Unsecure it with a wrench. Weld it to deconstruct to metal plates.

Turret

To ensure no one trespasses an area. Its options are (first option is the default setting):

• Status: On/Off - wether the turret's power is on or off.
• Behaviour control are locked/unlocked - can be unlocked with a Security level ID.
  • Check for Weapon Authorization: No/Yes - neutralizes people who have a weapon out but are not Heads or Security staff.
  • Check Security Records: Yes/No - searches Security Records for criminals.
  • Neutralize Identified Criminals: Yes/No - neutralizes crew members set to Arrest on the Security Records.
  • Neutralize All Non-Security and Non-Command Personnel: No/Yes - self explanatory.
  • Neutralize All Unidentified Life Signs: Yes/No - neutralizes aliens.

Turret	Requires to build	How to build
	x7 Any energy-based gun x1 x1	Build a turret frame from metal. Use a wrench to secure the turret frame(it can be moved around before being secured). Use metal on the turret frame to build the cover. Use a wrench on the frame to bolt the cover. Add the gun. Add the prox sensor. Use a screwdriver to secure it all. Use more metal on the frame. Finally use a welder to secure the second layer of metal. (use ID and hand to unlock and change turret settings, or turn it off and use wrench to move it)
How to deconstruct
Tools	(only if the turret hasn't been finished yet, otherwise damage it and use crowbar to try salvaging some components) Crowbar to pry off exterior armor. Screwdriver to open the internal access hatch. Remove Proximity sensor by hand. Remove gun by hand. Wrench to remove turret's metal armor bolts. Weld to remove turret's interior metal armor. Wrench to unfasten external bolts. Crowbar to dismantle the turret frame.

AI Core

The AI's house.

AI Core	Requires to build	How to build
	x4 x2 x1 x1 Optional: x1	Build AI Core Frame from 4 Plasteel Sheets. Wrench into place. Add Circuit board. Screwdriver. Add wires. (Optional) Upload any custom laws that you'd like to this AI core with an AI module. It comes pre-loaded with Asimov. Add brain placed in an MMI (only if you want a NEW AI). Add reinforced glass. Screwdriver.
How to deconstruct
Tools	Crowbar to remove glass panel. Crowbar to remove brain. Wirecutters to remove cables. Screwdriver to unfasten the circuit board. Wrench to unfasten the frame. Welder to deconstruct assembly.

Solar Panels and Trackers

You can generate power with these things.

Solar Panel Solar Tracker	Requires to build	How to build
	x1 x2 or x2 Tracker: x1	Place the solar assembly on where you want to construct your solar panel/tracker. To connect it to a wire you must construct it under a wire node. Wrench the solar assembly into place. (OPTIONAL) Add the electronics if you want to create a solar tracker. or Finish the construction by placing glass, or reinforced glass, into the assembly frame.
How to deconstruct
Tools	Take out the panel with a crowbar. If you are deconstructing a tracker: Take out the electronics with your crowbar. Wrench the leftover assembly from it's place and you will be able to move it.

Disposal Pipes and Machinery

The disposal system of the station.

Disposal Pipes and Machinery	Requires to build	How to build
	x1 or x1 or x1	Retrieve the pipe/machine from the Disposal Pipe Dispenser (found in Atmosia). Crowbar the floor tile, if exists, to access plating. Move pipe over plating, rotate and flip using the right-click menu. Wrench pipe. Weld pipe.
How to deconstruct
Tools	If Disposal Bin, start here: first turn off the pump and use a screwdriver to remove power connection, and continue... If Disposal Pipe, start here: Welder it to remove its joints. Wrench to detach it from the plating. Note: You can then click and drag the pipe segment onto the Disposal Pipe Dispenser to delete it.
()

Computers

Computers can have various uses.

Computer	Requires to build	How to build
	x5 x2 x5 x1	Use the metal and make a Computer Frame. Wrench it inplace. Insert the Circuitboard of your selection. Screwdriver. Wires. Glass. Screwdriver to finish.
How to deconstruct
Tools	Screwdriver to detach the screen. Crowbar to pry off the screen. Wirecutters to cut the cables. Screwdriver to detach the circuit lid. Crowbar to pry out the circuitboard. Wrench to detach the frame. Welder to disassemble the frame.

Modular Consoles

Modular Consoles are very flexible devices.

Console	Requires to build	How to build
	x10 At least: one power source one drive (HDD or SSD) one processing unit access to programs (network cards or datadisks)	Use the metal and make a Modular Console. Add your drive (HDD or SSD), processing unit and power source (wired or powercells, powercells require an additional "powercell controller" component). install a network card to access the NET and download more programs. Use disks to transfer data or programs from another modular decive in case you cannot access the NET.
How to deconstruct
Tools	Screwdriver to remove components. Wrench to deconstruct the empty console.

Machines

A machine frame with wiring and board installed	Requires to build	How to build
	x5 x5 x1 Components as specified by examining the mounted board	Build a machine frame from your 5 metal sheets. Add wires. Wrench it (sometimes optional). Add a circuitboard. Examine the machine frame and it will tell you what items you need now. When all the parts are added, screwdriver the machine frame to finish it.
How to deconstruct
Tools	Screwdriver to open the panel. Crowbar to remove all components. Wirecutters to remove the wires. Wrench to unsecure the frame. Screwdriver to disassemble into sheets.

For detailed information about each machine: machine construction guide.

Robots, Cyborgs and Mechs

Their construction is described at: Robots, Cyborgs and Mechs -pages.

Mineral Door

The actual doors of the game. Nobody ever uses these poor things and they aren't even airtight. Every ore material (and wood) can be made into a door. Other door types (which act otherwise similar, just made out of different material) are: sand, gold, silver, plasma, uranium and diamond. Keep in mind that Uranium doors put out a pulse of radiation every time they're opened.

Doors	Requires to build	How to build
	The mineral (or wood) of your choice x20	Stand where you would like the door. Use the metal and make a Door.
How to deconstruct
Tools	Wrench to unwrench it. Welder to disassemble the frame.

Conveyor Belt

The Conveyor Belts seen in Cargo, Disposals, and other places around the station can be set up similar to a floor tile, only they require a bit more setting up to become functional.

Conveyor Belt and Conveyor Belt Switch	Requires to build	How to build
	An Autolathe, with enough metal and glass.	Use the lever on the belt assemblies to link them. This must be done before placing them! Place the belt assemblies by using them on the floor (You can then rotate the belt tiles by using a Wrench). Place the lever somewhere by clicking the floor with it.
How to deconstruct
Tools	Crowbar to remove the Conveyor Belt tiles and Switches.

Furniture

Chairs

Chairs are for sitting down and making the place look nice. The only real use for chairs are to restrain people, building electric chairs or to buckle in when the shuttle is about to take off. Office chairs can also be used to move buckled people around.

Chair Stool Bar Stool Comfy Chair Office Chair Wooden Chair Winged Wooden Chair	Requires to build	How to build
	x1 or x2 or x5 or x3	Stand where you want the chair. Pick up some metal or planks. Click it in hand. Select Chair from menu.
How to deconstruct
Tools	Wrench a chair to transform it back into the starting material.

Tables/Reinforced Table

Tables are used to hold objects on. The most common ones are metal, glass and reinforced. You can climb onto tables, though it takes a short while. Tables can also be used for ghetto surgery.

Table Wooden Table Glass Table Poker Table Fancy Table Reinforced Table	Requires to build	How to build
	x2 or x2 x1 or x1 or x1 or x1 or x1	Pick up some rods (or wooden planks, if you want to make a poker table). Stand on the tile where you want the table. Activate them in your hand. Select table frame from menu. Use material on the table frame (Wood/glass/plasteel/metal/)(carpet on metal frame for fancy table, on wooden frame for poker table).
How to deconstruct
Tools	Be on any other intent than help (If a Reinforced Table: Welder first to weaken the table.) Wrench to disassemble it or screwdriver to partly disassemble it
()

Lockers

Lockers are among the most common and arguably the most useful of containers on the station. Nearly anything can fit inside, barring other lockers, crates, and certain especially large objects like racks and MULEbots.

Besides being welded shut, some lockers can be, well, locked. Several levels of access exist, such as security-, captain-, and private-level access. These can be opened with the proper level identification card, emag item, or with enough damage. If you don't want to take out your id to open these every time, you can alt-click them to lock/unlock them.

If you yourself are inside a locker, you can see your surroundings. Normally you can move in any direction to exit the locker, but if the locker is locked or welded, you will be unable to exit and you cannot unweld or unlock your cell from inside - at that point if you try to move around you will instead throw yourself against the sides of the locker, making a BANG BANG sound that can be heard from several squares away. Using the Resist button will allow you to slowly open the locker.

Coffins count as lockers.

Different types of lockers:

Locker	Requires to build	How to build
	x2 or x5 for coffin	Stand where you want the locker. Activate metal in hand. Choose Locker from the list.
How to deconstruct
Tools	Open the locker. Weld the locker with a welder to disassemble it into metal.

Rack

Racks are flat and wide, incapable of being walked over, and bolted together. They can hold any number of items, but they hold them stacked on top of each other like a table. They are most common in maintenance tunnels and the EVA room.

Rack	Requires to build	How to build
	x1	Activate metal in hand. Choose Rack from the list. Stand where you want the rack. Activate Rack Parts in hand.
How to deconstruct
Tools	Be on any other intent than help. Use a wrench to dismantle it to some Rack Parts. Use a wrench on the Rack Parts to disassemble them into metal.

Beds

Get your mind out of the gutter, they're for sleeping! Most station's beds come with a bedsheet, and new beds without sheets can be made with metal. The Medbay's preferred variation of a bed is the movable and collapsible Roller Bed, which is extremely useful for sex transporting patients.

You use a bed by going on top of it and *sleep. To buckle someone, put them on the bed and drag their sprite on it, to release click on the bed.

Bed	Requires to build	How to build
	x2	Stand where you want the bed. Activate metal in hand. Choose Bed from the list.
How to deconstruct
Tools	Use a wrench to dismantle it to two sheets of metal.

Bookcase

Holds any number of books inside.

Bookcase	Requires to build	How to build
	x5	Construct a frame with 4 wooden planks. Wrench the frame into place. Add a plank to the frame to make a shelf.
How to deconstruct
Tools	Remove any books. Crowbar out the shelf. Unsecure the frame with a wrench. Break apart the frame with a crowbar.

Drying Rack

Dries herbs for smoking, meat into jerky and grapes into raisins.

Drying rack	Requires to build	How to build
	x10	Use the planks in hand.
How to deconstruct
Tools	Wrench to unsecure the rack. Screwdriver to disassemble it.

Power Wires

Power wires (cable coils) are available from autolathes, yellow toolboxes, engineering vending machines or scattered about the station's maintenance-, construction- and storage-areas.

• Wires can be electrified if connected to a power net (a charged SMES or APC is attached to the wire), and you will get fried if you place or cut them.
• Insulated gloves negate any electrical shocks to the player.

How Do I Wire?

See Guide to wiring

Connecting Machines

Most machines are connected to powernets wirelessly by being in an arbitrary "area" containing a charged APC. Though some machines must be connected by having a powered wire under them.

+ = Connected

+ = Not connected

+ = Not connected

Please note that machines must also be anchored (generally wrenched down) to be connected.

Special cases :

• APCs are connected to an adjacent knotted wire with a special terminal, by doing the cable coil step.
• SMES input powernet must be connected through a terminal, while SMES output powernet must be connected through a classic node wire under the SMES.

Wire-net Reset

This is Byond's attempt to "reset" the whole power net in order to deal with new/removed wires that shift the power value of a whole system. It will cause APCs to stop charging for a moment, and in huge nets it can shut down the charging of all APCs for a while.

Don't mess with wires unless you have to, it causes problems to everyone in both OOC (potential lag) and IC (power loss).

Pipes

Pipes are only constructed from Pipe Dispensers in Atmospherics. To use a Pipe Dispenser, follow these steps:

1. Put Dispenser in a powered area.
2. Wrench Dispenser to lock it into place.
3. Click on the Pipe Dispenser with an empty hand and select the pipes you wish to use.
4. You have a pipe to play with now.
5. Wrench Dispenser to make it mobile once more.

Placing and Removing Pipes

Disposal Pipes

1. Rotate the pipe to the direction you wish the pipe to be in.
2. Wrench the pipe to the ground.
3. Use a lit welder to fuse the pipe to the ground.

Gas Pipes

1. Rotate the pipe to the direction you wish (pay attention to gas pumps as they are direction dependent).
2. Wrench into place.
3. Turn on the pipe, if necessary.

How to Remove a Pipe

1. Perform the step you used to set the pipe into place in reverse (make sure the pipe is powered off).
2. Brace for any junk that might blast out of the pipe.