Guide to Munitions

Do you long for new experiences? Are you comfortable working under pressure? Do you do well when working with explosives? Like making things go boom? If so, this is the guide for you! If you follow these simple instructions you will be prepared to load and maintain all of the weapons on your assigned vessel and qualified to call yourself a professional Munitions Technician. Be wary though, much like the goalie on a professional soccer team, you're the first one to blame if things go sour in combat, second only to the command staff, but if you can't handle the heat - stay out of the munitions bay.

Operating the guns

No smoking! Missiles, gunpowder bags and artillery shells blow up very easily, even from the smallest spark. Don't smoke, use welders, etc. in the weapons bay.

As a Munitions Technician, munitions assigned squad member, or Master At Arms, your job is to supply and control the various weapons on the ship to make sure they continue firing. This includes 50 Cal. Cannons, Railguns, Artillery cannons, Torpedo tubes, Gauss turrets, and the Automated Missile System (AMS). The faster you can load and prepare these weapons, the faster they can open fire on enemy ships. Do note that not all of the weapons listed here may be on your assigned vessel, so be certain to take inventory at the beginning of a shift and prepare accordingly for each weapon's needs.

An example of an Artillery bay configuration.

50 Cal. Cannons

50 Caliber cannons are the lifeblood of short ranged combat, serving as a rapid-fire weapon that is effective at taking down enemy fighters that other weapons may miss and destroying incoming missiles and torpedoes. The cannons are directly controlled by their designated consoles, and can hold 100 rounds of ammo. To control it, simply open the console and start shooting at things. Luckily for you, loading these cannons is as easy as firing them. Just go to the top deck and insert a new box of ammo into the gun turrets.

Railgun

The Railgun is a heavy-duty cannon that fires powerful burst rounds. It is the only weapon controlled by the navigation console in the bridge and requires regular maintenance. These weapons have recently been removed from the standard ship loadout, though their use and construction is still permitted on Nanotrasen ships.

This is a great big thing that does great big damage. It uses Teflon-coated tungsten rounds, of which you can load up to four at once before the magazine is full. Once it's loaded, go to the console linked to the railgun, click "Load Tray", then "Chamber Tray Payload", and finally "Disengage safeties". Before reloading after a shot is fired you'll have to turn the safeties back on to avoid the gun breaking, because the safeties stop the gun from deteriorating.

Artillery Cannon (Deck Gun)

The deck guns are massive cannons that, when operated correctly, can obliterate any enemy in an instant. They fire heavy projectiles which need to be primed before loading and are fueled with gunpowder which is used to propel the ammunition.
To load the Artillery cannon, simply take a cannon round and prime it with a multitool, then drag the round into the loading chamber and interact with the console to chamber the round. After that you're going to want to insert the gunpowder*. To do this you can just pick up a bag and insert it in the propellant racks, after putting it in you can add the gunpowder to the chamber by using the gun console.
It's important to note that there is no limit to how much gunpowder can be loaded at one time, meaning you can insert only 1 or even 20 bags of powder. Most of the time you'll want to put in a fair amount (about 5 bags or more) of powder as the cannon round travels very slowly without it.

Torpedo Tubes

Torpedo tubes, as the name suggests, fire high-velocity torpedoes which detonate immediately upon impact. Torpedo tubes are slow loading, require maintenance, but are capable of dealing incredible damage and can home in on the enemy ships, making shots almost always guaranteed to hit.

To load a torpedo tube, acquire a pre-made torpedo by dragging one onto a trolley (trolleys have a capacity of 5 torpedos) and bringing it over to the tube. Click on the trolley, click a torpedo to detach it, then drag and drop the torpedo into the tube to begin loading it. Afterward, use the adjacent console and press "Load tray", "Chamber Tray Payload", and finally "Disengage safeties" to finish loading the Torpedo tube. Remember to re-engage the Torpedo tube safeties whenever reloading to prevent damage.

Autonomous Missile System (AMS)

The automated missile system is a series of missile tubes linked up to a central computer, this allows it to fire missiles automatically at targeted enemies. Loading the missiles is similar to torpedo tubes, requiring them to be assembled and then dragged in, chambered, and loaded. Operating the AMS is fairly simple, as you can do it with the press of a button. Simply walk over to the AMS control console and select one of two firing modes:

Anti-ship

While using the anti-ship firing mode, the targeting system fires its missiles at enemy ships within its detection radius. It will also fire at enemy ships that have been targeted by fighters.

Countermeasure

If you select the countermeasure firing mode, the system will prioritize targeting incoming gunfire to avoid the ship getting hit. It also fires at ships within the detection radius if there's no incoming projectiles.

Gauss Guns

Gauss guns can be found exclusively on multi-z maps, and fire 300mm Teflon coated tungsten rounds. Unlike other ship weaponry, these are not controlled by Bridge Staff using the tactical console and are typically manned by Munitions Technicians. Gauss guns require no maintenance.

To man gauss guns, buckle yourself into the gauss gunner chair and you'll rise into the cockpit above. To fire, click on the overmap to fire a powerful short-range burst. Gauss guns eat through ammo quickly, and you'll ideally want someone below deck keeping you loaded at all times. Loading tungsten rounds is as simple as placing them in a crate, click-dragging it to the loading rack, and sending it up for reloading. Additional slugs can be acquired from a nearby Gauss ammunition dispenser that can be upgraded by science to produce slugs at a faster rate.

Acquiring ammunition

This is inevitable, the ship will consume ammo at a rapid rate. If you are out of ammo outside of combat, the following list will instruct you on how to acquire more. If you are out of ammo mid-combat you're fucked , communicate this with CIC and the rest of your team and use what you have left for the other weapons while coordinating with cargo.

50 Cal./Railgun/Deck gun

These are the easiest ammunition types to acquire. All of these can be bought in crates through cargo for 2000 credits per crate with the exception of the 50 Cal. which can be bought for 1000. The gunpowder for the deck guns can also be aquired this way.
Deck guns do have one exception, if the research has been done it is possible to print new types of gunpowder and bullets using the cargolathe.   

Torpedoes and Missiles

Torpedoes and missiles, unfortunately, cannot be ordered fully assembled and must be built by your own oil-covered hands. You need multiple things from cargo - components, casings, and warheads. Standard and armor piercing warheads can be ordered from cargo, but the other types must be researched by science before they can be made in the protolathe. Once you have all of these, turn on that conveyor belt and get this party started!

These are the steps you need to construct a missile or torpedo:

1. Get a casing, either made from metal or ordered from cargo.
2. Add the propulsion system.
3. Wrench the propulsion into place.
4. Add the guidance system.
5. Screwdriver the guidance system in place.
6. Add the IFF card.
7. Screwdriver the card in place.
8. Add the warhead.
9. Wrench the warhead in place.
10. Wire it.
11. Wrench once more.
12. Weld it all together.

There are a total of six different types of torpedoes you can make. Each serves a different purpose.

• Standard torpedoes are your stock standard torps. They carry an explosive payload that does a fair amount of damage to ships and fighters alike.
• Armor piercing torpedoes are able to do heavy damage to armored targets. Good against large ships.
• Nuclear torpedoes are the most powerful of the explosive torpedoes. They deal devastating damage to anything they hit, but are slower and more expensive than the other torpedo types. Use them wisely, as you won't be able to make more until science researches them.
• Decoy torpedoes don't carry an explosive payload, but can be used to distract an enemy's defensive weapons, giving you a clear shot for your more powerful weapons.
• Freight torpedoes are essentially cargo pods. Load them up and fire them at another ship to deliver the goods.
• Probes are torpedoes strapped with an array of scientific sensors. Firing one of these at an anomaly will generate research for science, and potentially unlock new technology nodes. Don't miss.

Unfortunately it's only possible to construct two types of missile right now, but it's still important to know the difference.

• High-velocity missiles are the standard missile type, they explode upon making impact and do a moderate amount of damage.
• Decoy missiles are used to confuse enemy targeting systems and radar detection. Allowing you to unleash your full wrath on the enemy without getting hit yourself.

Autonomous Missile Factory

The missile factory on the Tycoon

So you thought you had to wrench, weld and wire each missile individually? Of course not! The future is now! There's a quick and easy way to mass-produce missiles available right in the middle of your munitions bay: The factory line.

The Missile factory consists of three key parts: the conveyor belts, which have usually been slowed down to accomodate for the working speed of the robots. Tool arms, which use specific tools on the casing and are colored grey, and red colored part arms that apply parts such as guidance computers to the missiles. The robot arms in the factory always apply their effect in the direction the red arrows on their frame are pointing, but can be loaded with parts from any direction. They also have no part holding limit, so you can fill them up with as many parts as you want.

You can even extend the factory! The parts required for making factory machines can all be printed in the cargolathe along with the conveyor belts after their research has been completed.

Weapon maintenance

Most weapons require maintenance when they're used too much. You probably want to perform maintenance between each bout of combat.
Note: make sure there's nothing in the weapons and that the safeties are on, to prevent unnecessary explosions.

1. Unscrew the maintenance hatch on the primary external casing
2. Unbolt (wrench) the internal maintenance panel
3. Use a crowbar to carefully lever out the internal panel
4. Apply 10 units of Oil to the exposed internal machinery, repeat as needed
5. Replace (crowbar) and bolt (wrench) the panel, then fix (screwdriver) the hatch back in place

You're ready

It may be difficult to swallow all of the information you've read, but don't worry! You'll very rarely be working with all of these weapons at once as you have fellow Munitions Technicians at your side to pick up your slack. Above all, remember to have fun. With a bottle of spray paint, you can do all manner of things - name your torpedo tubes, draw funny faces near the PDC racks, and draw the borderline between the rest of the ship and the newly independent Munitia.

More Dakka

Is the ships just floating around in friendly space? Are all the guns loaded and you have nothing better to do? Or are those glorified laser pointers simply not enough? Fear not, because now you can even BUILD more guns! From the smallest .50 cal to the largets Railgun, you can outfit your ship with all the firepower.

Disclamer: this is ADVANCED munitions knowledge, you don't need to know this to be a good Munitions Technician. If you know this, all the better for you, but first time MTs shouldn't read this, as the knowledge told up above is more than enough. Also, most ships come equiped with all the neccesary weapons to defend themselves, so building new ones should only be a side job.

With that out of the way, here are a few tips if you want to arm your ship:

• To build any weapon, you will need circuits that are researched by R&D. These techs are costly, and are a good way down the tech tree, so don't expect them to be ready fast.
• Many weapon parts can be printed from the cargo protolathe. For this reason, it is a good idea to ask the Quartermaster for his spare machine board. If you can get your hands on the resources needed, you might want to set up an autolathe too.
• All big guns (Torp tubes, Railguns, VLS tubes) will need a Munitions Computer linked to them. These computers are researched along other weapon parts, and can be constructed like a normal computer. To link them, use a multitool on the built weapon first, then the computer, and select the deseried option.
  • Naval Artillery DOES NOT need a munitions computer.
• Don't overestimte how much ammo you have. Because while making the ship into a giant sniper rifle with 20 railguns might be fun, cargo WILL swiftly run dry of credits trying to supply you with ammo. 30 .50 caliber guns WILL destroy all the Torpedos launched at you, but the crew will easily go deaf from all the pom-pom-pom.
  • For this reason, giving the Munitions budget card to cargo is higly recommended.

Here is how you can construct ship weaponry:

Railgun

Railgun	Requires to build	How to build
	x6 x4 x2 x4 x4 x1 x1	Build Railgun frame from 4 Plasteel Sheets Wrench into place. Weld it to the floor. Insulate the frame with 4 Nanocarbon glass sheets Wrench the insulation in place Add 2 Railgun rails Note: Can be made from 1 duranium Wrench the rails in Add 4 Capacitators Note: They can't be inserted with an RPED, need to be inserted by hand Screwdriver the capacitators Add 4 Pieces of cable Weld the cabling in place Add the Firing Electronics Screw the electronics in Add the Plasteel casing Add the Loading tray Note: It's made from 10 metal
How to deconstruct
Tools	Screw the maintenance panel out Wrench the inner bolts away Pry the casing out Note: The weapon can now be lubricated Remove the loading try by hand Weld the casing away Unscrew the firing electronics Pry the electronics out Weld the soldering of the wires away Cut the wiring Screw the capacitators out Remove the capacitators by hand Unwrench the rails Pry the rails out Unwrench the insulation's bolts Pry the insulation out Unweld the frame from the ground Unbolt the frame Weld the frame away

.50 cal gun

.50 cal	Requires to build	How to build
	x35 x20 x10 x5 .50 cal turret board	Build and wire a Machine Frame from 5 metal Click here for a detailed construction. Add the Circuit board Add 20 titanium Add 30 metal Add 10 copper Add 5 cable Screwdriver it to finish the machine Hit it with a Multitool Build a 50 cal turret console Built like any other computer Hit the console with the Multitool to link it to the turret
How to deconstruct
Tools	Unload the gun either by shooting all the bullets, or by removing the magazine by hand Screw the maintenance panel out Wrench the inner casing Pry the casing out Note: The weapon can now be lubricated Beat it apart with any other tool

Torpedo Tube

File:Torptube.png Torpedo Tube	Requires to build	How to build
	x4 x6 x1	Build Torpedo Tube frame from 4 Plasteel Sheets Wrench it into place Weld it to the floor Add the Nanocarbon glass for the barrel Wrench the barrel in Wire the frame Add the Firing Electronics Screw the electronics in Add the Nanocarbon glass for the door Wrench the door in place Screw the maintenance hatch
How to deconstruct
Tools	Screw the maintenance panel out Wrench the inner casing Pry the casing out Note: The weapon can now be lubricated Unscrew the door frame Wrench the door out Pry the door out of the frame Unscrew the electronics Pry the electronics out of their place Cut the wires away Unbolt the barrel Pry the barrel out Unweld the frame from the floor Unbolt the frame Weld the frame apart

VLS launch tube

VLS launch tube	Requires to build	How to build
	x35 x20 x20 x10 VLS launch tube board	Build and wire a Machine Frame from 5 metal Click here for a detailed construction. Add the Circuit board Add 20 titanium Add 30 metal Add 20 copper Add 10 cable Screwdriver it to finish the machine
How to deconstruct
Tools	Screw the maintenance panel out Wrench the inner casing Pry the casing out Note: The weapon can now be lubricated Beat it apart with any other tool

Naval Artillery

Naval Artillery	Requires to build	How to build
	x120 x22 x25 x4 x50 x5 x34 x1 x4 Deck gun core board Deck gun payload gate board Deck gun powder gate board Deck gun auto elevator board Deck loading computer board	Designate a 3 x 3 space with a free tile on the floor above it for your gun Building the indoors, multitile part Build and wire a Machine Frame from 5 metal in the middle for your Core Click here for a detailed construction. Build and wire at least three Machine Frames and a Computer frame from 20 metal around your Core, these will be the other parts of your Deck Gun Click here for a detailed construction. Note: Which machine frame will become which machine does not matter, only that they are next to the core Add the Deck gun core board to the machine frame in the middle Marked on the picture with Red Add 20 titanium and 5 cable Screwdriver to finish the core Add the Deck gun payload gate board Marked on the picture with Blue Add 40 titanium, 10 cable and 10 copper Add a Railgun rail Note: Can be made from 1 duranium Add the Loading tray Note: It's made from 10 metal Screwdriver to finish the payload gate Add the Deck gun powder gate board Marked on the picture with Purple Building more of these machines does not increase the number of gunpowder that can be inserted, as you can insert multiple from just one gate Add 20 titanium, 5 cable and 20 copper Screwdriver to finish the gate Add the Deck gun auto elevator board Marked on the picture with Yellow Add 40 titanium, 10 cable, 20 copper and 5 diamonds Screwdriver to finish the elevator Build a chair from any material Marked on the picture with White ANY chair will do Add the Deck gun loading computer board to the Computer frame Marked on the picture with Green Finish the construction like usual If all machines are done, hit the Core with a Multitool to have it scan for nearby machines Building the outdoors part Go to the deck above you, on the same spot as your Core Use a GPS Build a Deck gun frame from 20 plasteel Wrench it to the ground Weld it down Add a Mac Barrel Note: Can be made from 1 duranium Weld the barrel in Add insulation made from 4 nanocarbon glass Wrench the insulation in Add 4 Capatitor Screw the capacitors in Add 4 wires Weld the wiring down Add the firing electronics Screw the electronics in Add 2 plasteel Add the Loading tray Note: It's made from 10 metal Hit it with a Multitool to link it to the core beneath it
How to deconstruct
Tools	The frame can be deconstructed this way: Screw the maintenance panel out Wrench the inner casing Pry the casing out Note: The weapon can now be lubricated The machines can be deconstructed this way: Screw the maintenance panle out Remove the components and the circuit board with a crowbar Cut the wires out Unwrench the frame from the ground Dissasemble the frame with a screwdriver

---

As said before, this is advanced stuff, usually you don't need to build new guns, and it's one hell of a job to try and keep them all loaded. But it does take up the downtime that you otherwise would have spent in the bar, and some weird people might find it fun.

*Nanotrasen brand gunpowder is not suitable for use in hot or burning enviroments, keep away from children with lighters.