User:Grabowski

Railgun

NT-STC4 coaxial railgun is a powerful weapon which fires directly out of the front of the ship, its projectiles are entirely unguided, so the firing solution must be perfect. It has a ammo capacity of 4 shots. It fires M4 NTRS 400mm teflon coated tungsten rounds, commonly known as Railgun Shells.

Railgun	Requires to build	How to build
	x6 x4 x2 x4 x4 x1 x1	Build Railgun frame from 4 Plasteel Sheets Wrench into place. Weld it to the floor. Insulate the frame with 4 Nanocarbon glass sheets Wrench the insulation in place Add 2 Railgun rails Note: Can be made from 1 duranium Wrench the rails in Add 4 Capacitators Note: They can't be inserted with an RPED, need to be inserted by hand Screwdriver the capacitators Add 4 Pieces of cable Weld the cabling in place Add the Firing Electronics Screw the electronics in Add the Plasteel casing Add the Loading tray Note: It's made from 10 metal
How to deconstruct
Tools	Screw the maintenance panel out Wrench the inner bolts away Pry the casing out Note: The weapon can now be lubricated Remove the loading try by hand Weld the casing away Unscrew the firing electronics Pry the electronics out Weld the soldering of the wires away Cut the wiring Screw the capacitators out Remove the capacitators by hand Unwrench the rails Pry the rails out Unwrench the insulation's bolts Pry the insulation out Unweld the frame from the ground Unbolt the frame Weld the frame away

Magnetic Accelerator

The Radial MAC cannon is an extremely powerful electromagnet which can accelerate a projectile to devastating speeds. It has a ammo capacity of 1 shot. It fires M4 NTRS 400mm teflon coated tungsten rounds, commonly known as Railgun Shells

MAC	Requires to build	How to build
	x6 Nanocarbon glassx4 x4 x1 x4 x1 x1	Build a MAC frame from 4 Plasteel Sheets Wrench it into place Weld it to the floor Add the barrel Made from 1 duranium Weld the barrel in Add the Nanocarbon glass insulation Wrench the insulation in place Add 4 Capacitors Screw the capacitators in Add wiring Weld the wiring Add the Firing electronics Screw in the electronics Add the Plasteel casing Add the Railgun loading tray Made from 10 metal
How to deconstruct
Tools	Screw the maintenance panel out Wrench the inner bolts away Pry the casing out Note: The weapon can now be lubricated Remove the loading try by hand Weld the casing away Unscrew the firing electronics Pry the electronics out Weld the soldering of the wires Cut the wiring Screw the capacitators out Remove the capacitators by hand Unwrench the insulation's bolts Pry the insulation out Unweld the barrel's soldering Pry the barrel Weld the frame from the floor Wrench the frame from the floor Weld the frame apart

Torpedo Tube

The M4-B Torpedo tube is a weapon system that's employed by nigh on all modern ships. It's capable of delivering a self-propelling warhead with pinpoint accuracy to utterly annihilate a target. It has an ammo capacity of 1 torpedo. It fires NTP torpedos, which are hand crafted by MTs, as shown above.

File:Torptube.png Torpedo Tube	Requires to build	How to build
	x4 Nanocarbon glassx6 x1	Build Torpedo Tube frame from 4 Plasteel Sheets Wrench it into place Weld it to the floor Add the Nanocarbon glass for the barrel Wrench the barrel in Wire the frame Add the Firing Electronics Screw the electronics in Add the Nanocarbon glass for the door Wrench the door in place Screw the maintenance hatch
How to deconstruct
Tools	Screw the maintenance panel out Wrench the inner casing Pry the casing out Note: The weapon can now be lubricated Unscrew the door frame Wrench the door out Pry the door out of the frame Unscrew the electronics Pry the electronics out of their place Cut the wires away Unbolt the barrel Pry the barrel out Unweld the frame from the floor Unbolt the frame Weld the frame apart

PDC / Flak rack

A small interface and loading system for ship mounted Point Defense or Flak guns. It fends off incoming torpedos and other projectiles. It is rare to see a ship without any of these. The PDC rack can hold 300, while the Flak rack can hold 100 shots.

128px PDC rack	Requires to build	How to build
	x4 x5 x1 x4 x2 x3 x1	Build PDC rack frame from 4 Metal Attach the frame to a wall Bolt the frame on Wire the frame Add the circuit board to the frame Note: You can change the circuitboard to Flak from PDC by using a screwdriver on it Add the machine parts Screw the parts in place
How to deconstruct
Tools	Screw the maintenance panel out Pry out the machine parts and the circuit board Cut the wires Unwrench it from the wall Lift it off the wall by hand